Setting Range of Auto Heat Press 2

• Temperature:
  • Celsius range: 100~210℃
  • Fahrenheit range: 210~410℉
• Time:
  • Time range: 1~999 seconds
• Pressure:
  • Kilogram pressure range: 20~80 kg
  • Pound pressure range: 50~170 lb

LOKLiK ImPress™ Auto 2 - Smart: Recommended Ironing Parameters

For more recommended ironing parameters, please refer to the following tables. If you cannot find your material below, please try to iron with the parameters of similar materials.

Notes:

• When the heat press temperature is higher, the pressing time should be shorter.
• For puff heat transfer vinyl, please peel off the PET film immediately after ironing to ensure proper puffing effect.
• Fabrics with a high cotton content are not recommended for sublimation, as the colors may not be vibrant and could fade after washing.
• For garments with higher thread counts, firmer textures, or coarser weaves, it's recommended to use higher pressure for better pressing results.

FAQs:

• For optimal ironing results, it is recommended to use HTVRONT materials. If the transfer effect is poor with the recommended settings, please adjust the temperature (±5°C/10°F), time (±5s), or pressure as needed.
• If DTF transfer results are unsatisfactory, check each factor individually to ensure the printer, ink, hot-melt adhesive, and DTF film are functioning properly, and verify that the correct application steps are followed.