Step 1:

Click "Upload".

Step 2:

Click "Print-Then-Cut".

Step 3:

Use tools to remove excess parts.

Step 4:

Import the printed image and contour into the Canvas (The contour is on the top of the printed image).

Step 5:

Select the contour layer and click "Make".

Step 6:

Connect the LOKLiK Crafter™ via USB or Bluetooth.

Step 7:

Select "Print-Then-Cut".

Step 8:

Click "Start Printing" and print it out.

Step 9:

Stick the printed paper to the cutting mat.

Step 10:

Adjust the cutting parameters - Click "Add to Task".

Step 11:

Load the cutting mat into the LOKLiK Crafter™ (Do not move the contour after printing) - Click "Start" and start cutting.

Step 12:

Unload the cutting mat after the cutting is finished.

Notes:

• Do not move the contour after printing. Otherwise, this will lead to an unprecise cutting result.
• Ensure the cutting mat is placed properly, or you need to reload it.
• Glossy paper may interfere with the machine's ability to read the cut sensor marks; Use paper with a matte finish instead.
• Recommended to use A4--21.0×29.7 cm (8.27x11.69 inches) and Letter--21.59x27.94 cm (8.50x11.00 inches) paper sizes for Print and Cut.

FAQs:

Cannot cut the contour precisely?

• Click "Help" - "Machine Calibration" to calibrate your machine.
• Replace a new blade if the original one is broken or dull.
• Contact customer service for help if there are further questions.