The images show different glasses that have been sublimated by HTVRONT Auto tumbler heat press.
← Go back
Heat Press Machine Tutorials sublimation Blank Tumbler Heat Press

[Machine Tutorials] How to Use HTVRONT Auto Tumbler Heat Press

Written by HTVRONT

|

Published on

|

Modified on

|

Reading time for 3 min

Did you know that you can transform plain tumblers into personalized masterpieces with just a few simple steps?

Well, we learned how to use the automatic heat press in the last article. Today, let's learn how to sublimate your mugs, tumblers, and glasses with the HTVRONT Auto tumbler heat press.

Before we dive into the tutorial, kindly prepare the following items. Having these ready will make the learning process easier. Here we need to prepare:

  • Work Size: Diameter: 2.67 inches, Length: ≤ 10.6 inches
  • Sublimation Blank: ≤ 3.48 inches, Capacity: 10-30 oz
  • Prepare a sublimation blank for your desired item.
  • Weeding tool that is used to remove the heat tape.

In this article, we will cover everything you need to know about using the HTVRONT Auto Tumbler Heat Press, including:

  • The basics of the control panel.
  • Apply your design.
  • Troubleshoot common issues.
  • Caring for and maintaining the machine.
Quick in
#1. Sublimate Mugs #2. Sublimate Tumblers #3. Sublimating Glass

Understanding the Control Panel

Unlike automatic press machines, the control panel of HTVRONT roller heat press machine has no mode adjustment, memory mode and automatic mode. You only need to understand a few buttons:

The image shows the control panel of HTVRONT Auto tumbler heat pres.
  • ①Power key: Turns the machine on and off.
  • ②Temp key: Sets the temperature and allows you to switch between Celsius and Fahrenheit.
  • ③Time key: Sets the pressing time.
  • ④"+" key: Increase the temperature or time value.
  • ⑤"-" key: Decrease the temperature or time value.
  • ⑥“R” key: Starts the pressing process.
  • ⑦Display screen: Show temperature, time, mode level, and "Auto" mode indicator.

Machine Operation

  • Power On: Press the switch key until the machine's display lights up.
  • Temperature Settings:
    • Press and hold the "Temp" key for 3 seconds to switch between Celsius and Fahrenheit.
    • Press "Temp" to adjust the temperature using the "+" and "-" buttons.
  • Time Settings: Press "Time" to adjust the time using the "+" and "-" buttons.
  • Start: The "start" key will illuminate green and beep when the set temperature is reached.

Preparing Your Tumbler

Before you can apply a design to your tumbler, you need to prepare it. This involves cleaning the tumbler and applying a primer.

To clean the tumbler, simply wash it with soap and water. Make sure to dry the tumbler completely before applying the primer.

To apply the primer, simply spray the tumbler with a light coat of primer. Allow the primer to dry completely before applying the design.

#1. Sublimate Mugs

The image shows sublimating mugs.

The heating temperature is 390℉, and it will take 480s(8 minutes).

1. Press the "Start" button to heat the pressing mug.

The image shows pressing start to heat mug.

2. Put the mug into the machine.

The image shows putting mug into the machine.

3. Pull out of the mug. (You need to wear heat gloves because the handle is too hot to hurt your hands.)

The image shows pulling out of mug from the machine.

4. Remove the heat tape with a bending hook.

The image shows removing the heat tape with a bending hook.

Let's take a look.

It's perfect.

Image showing the finished mug

2. Sublimate Tumblers

The image shows sublimating tumbler with HTVRONT Auto tumbler heat press.

The heating temperature is 390℉, and it will take 240s(4 minutes).

1. Press the "Start" to begin heat pressing tumbler.

The image shows pressing the start button to heat pressing the tumbler.

2. Put the mug into the machine.

The imahe shows putting tumbler into the machine.

3. Spin the tumbler 180 degrees and press "start" again.

The image shows spinning the tumbler.

4. Pull out of the tumbler.

The image shows pulling out of the tumbler from the machine.

5. Let's tear out of the paper wrapped on the tumbler. (Must wear the heat gloves to work.)

The image shows tearing out of the paper from tumbler.

Done it!

I love 3D pattern every time I make it.

The image shows completing a sublimation tumbler.

3. Sublimating Glass

The image shows sublimating glass with HTVRONT Auto tumbler heat press.

The heating temperature is 380℉, and it will take 360s(6 minutes).

1. Put the glass into the machine. (Don't forget to wear the heat gloves)

The image shows putting the glass into the machine.

2. Press "start" button to begin glass heat pressing.

The image shows pressing "start" button to heat pressing the glass.

3. Spin the glass 180 degrees and press "start" again.

The image shows spinning the glass.

4. Pull out of the glass.

The image shows pulling out of the glass from the machine.

5. Tear out of the paper.

The image shows tearing out of the paper from glass.

Let's take a look.

Wow Perfectly sublimated.

The image shows completing sulimation glass.

Need more details on temperature and time settings for other materials? For further reading, check out our HTVRONT Auto Tumbler Press temperature and time chart.

Troubleshoot common issues

Issue: The HTV is not adhering to the tumbler. 

Solution: Ensure that the tumbler is clean and dry before applying the HTV. Also, make sure that you are using the correct temperature and time settings for your HTV material.

Issue: The HTV is peeling off the tumbler. 

Solution: Make sure that you are using the correct pressure when applying the HTV. Also, ensure that the HTV is fully cooled before removing the transfer tape.

Issue: The HTV is wrinkled or bubbling. 

Solution: Make sure that you are using the correct temperature and time settings for your HTV material. Also, ensure that the HTV is fully cooled before removing the transfer tape.

Caring for and Maintaining the Machine

Cleaning:

  • Unplug the machine before cleaning.
  • Wipe down the exterior of the machine with a damp cloth.
  • Clean the interior of the machine with a mild detergent solution.
  • Dry the machine thoroughly before storing it.

Maintenance:

  • Inspect the machine regularly for any damage.
  • Replace any damaged parts immediately.
  • Store the machine in a cool, dry place.

Comments

My auto tumbler press seems to start burning off the sublimation after turning. I have always done 365 degrees and turn after 90 seconds on my other manual press. Is it getting to hot? I just started using it. Bought brand new.

Dawn

Leave a comment

Other Guest Posts

View all
  • How Does a Tumbler Heat Press Work

    How Does a Tumbler Heat Press Work?

    A tumbler heat press uses heat and pressure to transfer designs onto tumblers, mugs, and bottles. It works by activating sublimation ink through high temperatures, bonding the design permanently to...

    How Does a Tumbler Heat Press Work?

    A tumbler heat press uses heat and pressure to transfer designs onto tumblers, mugs, and bottles. It works by activating sublimation ink through high temperatures, bonding the design permanently to...

  • How Much is a Tumbler Heat Press

    How Much is a Tumbler Heat Press?

    A tumbler heat press is a tool for customizing drinkware, with prices ranging from $100 to over $1,000 depending on material, features, and brand. The article analyzes the characteristics of...

    How Much is a Tumbler Heat Press?

    A tumbler heat press is a tool for customizing drinkware, with prices ranging from $100 to over $1,000 depending on material, features, and brand. The article analyzes the characteristics of...

  • How to Use a Heat Press on a Tumbler

    How to Use a Heat Press on a Tumbler?

    Using a heat press on a tumbler is a great way to create custom designs for personal use or business projects. This guide provides detailed steps, from preparing your design...

    How to Use a Heat Press on a Tumbler?

    Using a heat press on a tumbler is a great way to create custom designs for personal use or business projects. This guide provides detailed steps, from preparing your design...

  • What is the Difference Between DTF Printing and Sublimation

    What is the Difference Between DTF Printing and...

    DTF printing and sublimation are popular DIY techniques, but they differ in materials, processes, and results. Sublimation embeds vibrant designs into polyester or coated materials, offering seamless, durable prints but...

    What is the Difference Between DTF Printing and...

    DTF printing and sublimation are popular DIY techniques, but they differ in materials, processes, and results. Sublimation embeds vibrant designs into polyester or coated materials, offering seamless, durable prints but...

1 4
View all

Other Videos

View all
1 4
View all