How to DIY a Phone Case with an HTVRONT H17 Phone Case Heat Press

← Go back

How to DIY a Phone Case with an HTVRONT H17 Phone Case Heat Press

Written by Mercy Lilian

Published on July 10, 2025

Modified on March 2, 2026

Reading time for 6 min

The phone goes everywhere with you. Having a customized phone case goes beyond just protecting the phone to expressing your personality. And now, the new HTVRONT H17 phone case heat press makes it easier than ever to transfer designs to your phone case. Not just that, you can also use it to customize coasters, badges, fridge magnets, keychains, ceramic tiles, and many more.

In this article, I will focus on how to use LOKLIK Idea Studio software to edit your design, print it, and lastly, how to operate the HTVRONT H17 phone case heat press to transfer the design. Once you are through with the first trial, you will get addicted to the ease and fun of using the heat press to design different substrates.

Quick in

1. The Materials and Tools Needed 2. Steps for Using the Phone Case Heat Press Step 1: Upload and Edit the Design Step 2: Insert the Sublimation Film in the Printer Step 3: Print the Design Step 4: Power up Your Phone Case Heat Press Machine Step 5: Apply the Right Settings Step 6: Place the Phone Fixture Inside the Heat Press Step 7: Preheat the Heat Press Step 8: Cover the Lens Gap on the Phone Case Step 9: Mount the Case onto the Fixture and Place the Film Step 10: Start the Heat Transfer Step 11: Remove the Sublimation Paper 3. FAQs on the Phone Case Heat Press

The Materials and Tools Needed

HTVRONT H17 Phone Case Heat Press

LOKLIK Idea Studio

A computer or mobile device

A sublimation printer and ink

An A4-size sublimation film

A pair of heat-resistant gloves

Blank phone case

Fixtures

Tweezers

A ready design

Steps for Using the Phone Case Heat Press

Want to make a super cool phone case yourself? This video is all you need! From selecting materials to heat transfer, we'll guide you step by step to create a super unique phone case with the HTVRONT H17 Phone Case Heat Press!

Before moving on to the actual heat pressing process, it’s important to ensure your design is properly prepared. Once you’ve uploaded and edited your artwork to fit the phone case dimensions, the next step is to set up the heat press machine for optimal results.

Step 1: Upload and Edit the Design

You can do this either using the LOKLIK Idea Studio desktop version or the phone version.

Using a Desktop

Open the LOKLIK Idea Studio software on your computer and upload the design. You can either drag and drop or import an already done image. Although the software supports SVG, JPEG, and BMP formats, it is best to use PNG for layered and detailed designs.

The picture shows the step 1 of DIY phone case with HTVRONT phone case heat press.

Click on the canvas settings and select “phone case heat press”.

The picture shows the step 2 of DIY phone case with HTVRONT phone case heat press.

Then it will prompt you to choose your phone model from the pre-made template list that includes Samsung, Google, Xiaomi, Huawei, and Badge.

The picture shows the step 3 of DIY phone case with HTVRONT phone case heat press.

A green frame will appear on the canvas, representing the phone case for the model you choose. The dimensions are accurate, so you only need to fit the image within the frame without altering the frame itself. Ensure the design perfectly fits without any edges peeking out, as they will be cut out after transferring.

The picture shows the step 4 of DIY phone case with HTVRONT phone case heat press.

Remember to mirror the image before sending it to the printer, especially if it has any letters, numbers, or logos that have to keep a certain orientation.

Using a Mobile Device

Open the LOKLIK Idea Studio software on your mobile device and upload the design.

The picture shows the step 5 of DIY phone case with HTVRONT phone case heat press.

You will follow the same steps as you would when using a computer (as shown above), only with a phone version of the software.

The picture shows the step 6 of DIY phone case with HTVRONT phone case heat press.

Choose the phone model.

The picture shows the step 7 of DIY phone case with HTVRONT phone case heat press.

Choose the HTVRONT H17 Phone Case Heat Press.

The picture shows the step 8 of DIY phone case with HTVRONT phone case heat press.

Get the image.

The picture shows the step 9 of DIY phone case with HTVRONT phone case heat press.

Resize it.

The picture shows the step 10 of DIY phone case with HTVRONT phone case heat press.

Step 2: Insert the Sublimation Film in the Printer

Power up the sublimation printer and open the paper tray. Load a blank sublimation film with the matte side facing up, as it is the side where the design will print. Sometimes the printer will jam when its sensor fails to detect the film. This can be easily fixed by placing a label paper on the bottom left of the film, on the printable side.

If you want to buy all the materials at once, you can go directly to the H17 accessories section on the HTVRONT website.

The picture shows the step 11 of DIY phone case with HTVRONT phone case heat press.

Step 3: Print the Design

Select high-quality printing. If your machine has the option, choose the right ICC color profile. It helps match the printed colors with what transfers to the phone case. Press the start button.

After printing, let the film dry, and avoid touching the wet area as it is still smudgy.

Step 4: Power up Your Phone Case Heat Press Machine

As the film dries up, plug the heat press into a power source. When the power button starts flashing white, it means that the device is properly plugged in. Press it to start the machine.

Step 5: Apply the Right Settings

Press the temperature button and set it to 125 degrees and 135 degrees for the lower and upper heating plates, respectively.

The picture shows the step 12 of DIY phone case with HTVRONT phone case heat press.

Then, lightly press the time button and set it to 305 seconds for preheating and pressing.

The picture shows the step 13 of DIY phone case with HTVRONT phone case heat press.

Here are recommended settings for different substrates.

Phone Case Material	Temperature	Time
Poly-coated plastic	188°C	50 seconds
Coated hard rubber	188°C	45 seconds
Sublimation-ready leather	179–185°C	40 seconds
Fiberboard	190°C	60 seconds

Step 6: Place the Phone Fixture Inside the Heat Press

Put on your heat-resistant gloves and place the phone model in the heating area. Then use the filler blocks provided to fill the gaps for bigger phone cases.

The picture shows the step 14 of DIY phone case with HTVRONT phone case heat press.

Step 7: Preheat the Heat Press

Close the heat press cover and press the start button to preheat.

After the green light comes up, put the printed sublimation film on the heat press with its printed side facing up. Leave it to dry for 5 minutes. Completely drying the sublimation film improves the results after transferring.

The picture shows the step 15 of DIY phone case with HTVRONT phone case heat press.

Step 8: Cover the Lens Gap on the Phone Case

As you wait for the film to dry, place the lens pad inside the phone case to cover the gap meant for the phone camera and flashlight. Use heat-resistant tape to secure the pad.

The picture shows the step 16 of DIY phone case with HTVRONT phone case heat press.

The phone case should be free of dust and grease before pressing.

Step 9: Mount the Case onto the Fixture and Place the Film

Place the phone case on the fixture and press it down. Press firmly towards the lower left to help the fixture contract and fit more easily.

The picture shows the step 17 of DIY phone case with HTVRONT phone case heat press.

Put the film in the heating chamber with the printed side facing down. Ensure it is flat before closing the heat press lid.

The picture shows the step 18 of DIY phone case with HTVRONT phone case heat press.

Step 10: Start the Heat Transfer

When the heat press reaches the set temperature, press the start button.

The picture shows the step 19 of DIY phone case with HTVRONT phone case heat press.

Step 11: Remove the Sublimation Paper

When the transfer process is complete, open the heat press cover and peel the sublimation film while it is still hot, with your heat-resistant gloves on.

The picture shows the step 20 of DIY phone case with HTVRONT phone case heat press.

Then remove the phone case from the fixture and let it cool.

The picture shows the step 21 of DIY phone case with HTVRONT phone case heat press.

Just like that, you have completed your DIY phone case design.

FAQs on the Phone Case Heat Press

1. Why is the design blurry and the colors faded after the transfer?

This could be caused by using lower temperatures than the recommended ones or pressing for a short period. Use the correct temperature and time settings. The sublimation film may also not have fully adhered or been tightly pressed onto the substrate. Check the printer to ensure everything is aligned.

2. Can a regular printer print the design?

No. Standard printers often produce poor-quality prints using sublimation ink, which is necessary for the transfer process. Instead, use a sublimation printer and ink.

3. Can I peel the sublimation film when cold?

The sublimation feel should be peeled from the carrier immediately after a transfer, while it is still hot. This ensures that the design does not stick back to the film. However, you should always follow the manufacturer’s recommended peeling method.

4. Should the design be mirrored before printing?

Yes. Not mirroring the image makes it appear reversed after transferring. When printing on sublimation paper, the image is printed face down, meaning that the process will eventually be reversed when pressing it onto the phone cover.